Blog

Slow DTH water well drilling is rarely caused by the rig or hammer. In most cases, the real issue is a wrongly selected diesel screw air compressor. This article explains the most common compressor...

Why Most DTH Drilling Projects Fail at the Compressor Stage When buyers ask "What air compressor do I need for DTH water well drilling?" , they are usually already at risk of choosing the wrong one...

This guide explains how to choose the right air compressor for DTH water well drilling by matching air pressure, air flow, drilling depth, and DTH hammer size. It also compares Atlas Copco, Chigo, ...

This article explores the critical question: Does higher pressure always improve drilling speed? It explains that while moderate pressure enhances rock-breaking efficiency, excessive pressure leads...

Down-the-Hole (DTH) drilling rigs are vital for mining, construction, quarrying, and water well projects, especially in hard rock formations. Choosing between split type and integrated type DTH dri...

This guide compares truck mounted, trailer, and tractor drilling rigs by cost, mobility, and applications to help you select the right equipment for your project. We break down each rig’s upfront a...

Why Wells Produce Sand After Drilling Sand production after completion is often caused by: Inadequate well development Improper screen installation Formation changes over time Early diagnosis is cr...

Introduction Down-the-hole (DTH) drilling is widely used in water well drilling, mining, quarrying, and construction projects . One of the most critical factors that determines drilling efficiency ...

Sand production in water wells is rarely a coincidence — in most cases, it is the result of improper drilling equipment selection. Even in challenging geological conditions, the right water well dr...

Sand production is one of the most common and frustrating problems in water wells, especially in areas with loose or unconsolidated formations. Many well owners assume that sand in the water is cau...

Introduction: Drilling Failures Are Often Caused by Geology, Not Equipment In water well drilling, geothermal drilling, and civil foundation projects, low efficiency and frequent drilling failures ...

Air Drilling vs Water Drilling: How to Choose the Right Method for Hard Rock and Mixed Formations Choosing the correct drilling method is one of the most critical decisions in any water well or geo...